服务热线

021-39529830  021-39529839

您的位置:网站首页 > FESTO气缸

供应德国费斯托多位置气缸,FESTO气缸选型价格 产品名称:供应德国费斯托多位置气缸,FESTO气缸选型价格
产品型号:MS4/D-MINI-LFM-B
产品展商:德国FESTO费斯托

详细介绍

供应德国费斯托多位置气缸,FESTO气缸选型价格
上海乾拓贸易有限公司
 企业QQ:2880626087
 电话;021-69001039
 手机;17321017802(微信)
 邮箱;17321017802@163.com
 地址:上海市嘉定区江桥嘉涌路99弄6号713室
Multi-position cylinders ADNM Product range overview
Function Version Type Piston  Max. stroke Piston rod With female thread With male thread [mm] [mm]
Up to five positions Z1 … Z5 can be approached by connecting two to five cylinders with the same piston diameter and different stroke lengths in series.
For trunnion flange ZNCF/CRZNG
For compensating radial deviations
aB Rod clevis SG/CRSG
Permits a swivelling movement of the cylinder in one plane
aC Self-aligning rod coupler FK/CRFK
For compensating radial and angular deviations
For connecting compressed air tubing with standard external diameters
aH Proximity sensor SME/SMT-8
Can be integrated in the sensor slot of the cylinder profile barrel
aI Proximity sensor SME/SMT-8M
2 The sum of all the positions must not exceed the following values:  25: 1000 mm  40, 63, 100: 2000 mm
Pos. Z1: 50 mm Pos. Z2: 100 mm Pos. Z3: 150 mm Pos. Z4: 200 mm Pos. Z5: 300 mm Sum: 800 mm  1000 mm
Z5  Z4  Z3  Z2  Z1  1000
3 The positions of the internal cylinders must not exceed the following values:  25: 200 mm  40, 63: 300 mm  100: 400 mm
Pos. Z1: 50 mm   200 mm Pos. Z2: 100 mm  200 mm Pos. Z3: 150 mm  200 mm Pos. Z4: 200 mm  200 mm
4 The position of the last cylinder must not exceed the following values:  25: 300 mm  40, 63, 100: 1000 mm
Pos. Z5: 300 mm  300 mmZ5
2017/06 – Subject to change 3  Internet: www.festo.com/catalogue/...
Multi-position cylinders ADNM Product range overview
Positional tolerance T [mm]
The subsequent position must be greater than the sum of the preceding position plus the positional tolerance T.
The positional tolerance depends on the number of positions.
Position Z1 Z2 Z3 Z4 Z5 Piston  25 Cylinder with 2 positions 1.8 0.8 – – – Cylinder with 3 positions 3.3 1.8 0.8 –
 – Cylinder with 4 positions 4.8 3.3 1.8 0.8 – Cylinder with 5 positions 6.3 4.8 3.3 1.8 0.8
Piston  40, 63, 100 Cylinder with 2 positions 1.8 0.8 – – – Cylinder with 3 positions 3.4 1.8 0.8 –
– Cylinder with 4 positions 5 3.4 1.8 0.8 Cylinder with 5 positions 6.6 5 3.4 1.8 0.8
Multi-position cylinders ADNM, standard port pattern Peripherals overview
Mounting attachments and accessories
Description  25  40, 63, 100  Page/Internet
For bearing and end caps
3 Swivel flange SNCL/SNCL-…-R3
4 Swivel flange SNCB/SNCB-…-R3
For swivel flange SNCL
6 Swivel flange SNCS/CRSNCS/SNCS-…-R38
7 Clevis foot LBG/LBG-…-R3
8 Trunnion flange ZNCF/CRZNG
ample: ADNM-…, with 5 positions
Initial position Z1 Position 1 Z2 Position 2 Z3 Position 3 Z4 Position 4 Z5 Position 5
The following rules must be observed to ensure the functionality of the cylinder:
Rules Example: ADNM-25-…-50Z1-100Z2-150Z3-200Z4-300Z5, with 5 positions
The subsequent position (e.g. Z4) must be greater than the sum of the preceding position (Z3) plus the positional tolerance T ( 3)
Zn  Zn1  Tn1
Pos. Z2 (100 mm)  pos. Z1 (50 mm) + 6.3 mm Pos. Z3 (150 mm)  pos. Z2: (100 mm) + 4.8 mm Pos. Z4 (200 mm) 
pos. Z3: (150 mm) + 3.3 mm Pos. Z5 (300 mm)  pos. Z4: (200 mm) + 1.8 mm     Z1Z2Z3Z4Z5
Can be integrated in the sensor slot of the cylinder profile barrel
For protecting the sensor cable and keeping dirt out of the sensor slots

供应德国费斯托多位置气缸,FESTO气缸选型价格

在线客服