您的位置：网站首页 > SMC电磁阀
a drop in suction force, or slow response time, stop operation and replace the filter.
1. Using a precision driver, remove the filter assembly (!2 or !4) from the main unit.
2. Turn the filter guide by hand and remove. 3. Replace the filter
(!3 or !5) and gently hand tighten the filter guide. At this time,
check that there is no foreign matter on the O-ring of the filter assembly.
4. Return the filter assembly to the main unit. (Tightening torque: 0.12 N·m)
Note 3) Impact resistance: No malfunction occurred when it is
tested in the axial direction and at the right angles to the main valve and
armature in both energized and de-energized states every once for each condition.
<Filter replacement instructions> If there are situations such as filter clogging,
(Values at the initial period) Vibration resistance: No malfunction occurred in a
one-sweep test between 45 and 2000 Hz. Test was performed at both
energized and de-energized states in the axial direction and at the