您的位置：网站首页 > FESTO气动元件
-H- Note When using external devices, data communication must be programmed by the user.
Bus connection Operating modes System expansion
The CODESYS controller is a modern control system for CPX terminals that enables programming
with CODESYS to IEC 61131-3. The power supply to and communication with other modules takes place via the interlinking block.
In addition to network connections, LEDs are also provided for the bus status,
operating status of the PLC and CPX peripherals information, as are switching elements and a diagnostic interface for CPX-MMI and CPX-FMT.
The control blocks CPX-CEC-…-V3 are remote controllers that can be connected to a higher-order PLC via the fieldbus nodes of the CPX terminal or via Ethernet, for example:
PROFINET EtherNet/IP EtherCAT PROFIBUS DeviceNet
Control blocks CPX-CEC-…-V3 Key features
Application Controller Programming in a global language
The control blocks CPX-CEC-…-V3 are modern control systems for CPX terminals that enable programming with CODESYS to IEC 61131-3.
CODESYS V3 provided by Festo offers a convenient user interface with the following functions:
Integrated module libraries Library Manager for integrating further libraries Visualisation editor
Simulation mode Integrated project documentation Debugging functions for fault finding
Configuration and parameterisation of the controller using the control configuration Object-oriented programming
Basic functions CPX-CEC-C1-V3 offers CPX-CEC-M1-V3 offers CPX-CEC-S1-V3 offers
The control blocks CPX-CEC-…-V3 offer the following basic functions:
Control blocks CPX-CEC-…-V3 Key features
For controlling electric and pneumatic drives for small tasks. Stand-alone or in mechatronic solutions via CODESYS V3 provided by Festo.
Display generation with integrated controller with CODESYS V3 provided by Festo,
powerful processors, combined with widescreen technology for greater functionality, higher resolution and versatile access options.
CODESYS V3 provided by Festo for the best valve/sensor terminal on the market:
CPXCEC reduces installation costs as an intelligent remote system to IP65/IP67 directly at the machine.
Ideal for CPX terminal and motion applications with up to 127 electric drives,
PTP and SoftMotion applications up to 3D plus auxiliary axes.
Advantages for users Increased performance Reduced costs
Improved cycle times – more connectable actuators. Compatibility with almost all control systems on the market is ensured via the CPX terminal.
The extensive CODESYS function library provides diagnostics and condition monitoring options.
For standardised pre-processing: reduces installation costs as an intelligent remote I/O terminal to IP65/IP67 directly at the machine.
The control blocks CPX-CEC-…-V3 are ideally adapted to CPX and motion applications with up to 127 axes.
Simple, yet efficient: decentralised structures The only one in the world to IP65
The modular I/O system with up to 512 I/Os and CAN master functionality offers complete flexibility, whether for open-loop or closed-loop control.
Stand-alone for low-cost automation of manual workstations, for example, or remote control with pre-processing.
The fully integrated automation platform for standard, proportional and servopneumatics, sensors and motion control to IP65.
Simple commissioning is also included.
Classification of CPX-CEC in the portfolio for multi-axis controllers for electric drive technology
Compact controller CECC Integrated controller in CDPX Integrated control blocks in CPX terminal:
Compact and with more functions.
Stand-alone Remote controller on the fieldbus Remote controller on Ethernet
CANopen connects CPX-CEC with valve terminals and electric drive controllers from Festo:
CPX, CPV CMMP-AS, CMMS-AS/-ST, etc. AS-Interface gateway
Ethernet connects CPX-CEC with additional controllers and operator units from Festo: CECX CDPX Camera SBO…-Q
System expansion (examples) CPX-CEC as a stand-alone or remote controller CPX-CEC-C1 as a CANopen fieldbus master
2017/01 – Subject to change 3 Internet: www.festo.com/catalogue/...
Programming with CODESYS to IEC 61131-3 Communication via Ethernet (Modbus/TCP, EasyIP, TCP/IP)
Process visualisation using operator unit CDPX or OPC server
Communication via fieldbus in combination with a fieldbus node in the CPX terminal Diagnostics and quick commissioning of CPX modules via handheld CPX-MMI
All basic functions CANopen master for controlling up to 127 CANopen stations. Electric axes can be controlled in point-topoint mode
All basic functions CANopen master for controlling up to 8 electric axes (recommended) in interpolated mode
(3 of these axes with circular interpolation and 5 additionally with linear interpolation) SoftMotion function library for coordinated multi-axis movements
All basic functions RS232 interface for operating external devices